Renegade Craft Fair - Holiday 2017

I showed off some new work at Renegade Craft Fair this past weekend -- which included my largest piece to-date, a six-foot high ribbon wall hanging. Thanks to everyone who came out and said hello! 

I've got a couple more holiday events on the calendar, so if you'd like to come check out these pieces in person, check out the events page. And if you'd like to place an order for one of these four pieces, you can do that through my online shop

Maple Loop for an Interior Designer's Home

I recently made a Maple Loop for a San Francisco-based interior designer's home. His taste in decor is obviously impeccable, so getting a commission from him -- for his own home, no less! -- was an honor.

If you'd like to discuss a custom piece of your own, get in touch through this form

Early Elektra Steel Pieces on Sale

I'm moving into a new studio space* next month, and because I'm all about that Marie Kondo life, I'm paring down my possessions. I have a handful of one-of-a-kind pieces in my studio that I'm never going to make again, and I'm ready to find homes for them. Take a look, and let me know if any of these strike your fancy!

Claro Cart: Normally $1,800, on sale for $1400

Dodecahedron Floor Lamp: Normally $1,200, on sale for $980

Nest: Normally $2,2,00, on sale for $1,800 

Large Geo Vase: Normally $580, on sale for $450 -- UPDATE: SOLD

Cube Rose No. 2: normally $1,200, on sale for $700

Mountain: Normally $400, on sale for $250

*For those of you curious about the studio move, I'm staying at ShopFloor, but moving into a bigger, nicer space within the building. And I'm going to be sharing it with one of my favorite makers and humans on the planet, Emi Grannis!

LOOPS Opening Reception at Harmonic Brewing

On Thursday, I had an opening reception to celebrate some new works going on display at Harmonic Brewing in the Dogpatch. The three new wall hangings feature some new materials for me: maple, walnut, and mirrored acrylic. Check it out:

As an extrovert who's running a business solo, events like these totally give me life. It's highly motivating to have a deadline, and it's such a treat to have customers, friends, and loved ones show up and hang out for a few hours. Some of the neighbors came by, too -- folks from both Center Hardware and Philz Coffee stopped in to chat! 

I also used the event as an excuse to do a soft launch for my new line of enamel pins, which are essentially wearable, micro versions of my wall hangings. Pins are available now in the shop.

Come by Harmonic Brewing if you'd like to see these pieces in person! They have excellent beer and cheesy popcorn, and they often have a food truck parked outside. If you're interested in an enamel pin, my online shop is open for business.

Reflections from Summer Intern Alexis Bullock

This is a guest post written by Elektra Steel's summer intern, Alexis Bullock! Alexis is a rising sophomore at Northwestern, majoring in Art Theory and Practice and Psychology. She made herself totally indispensable this summer -- she produced and photographed a line of enamel pins, developed a launch plan, researched potential wholesale accounts, and helped paint a mural. In this post, she reflects on what she took away from her two internships this summer.

--

I started this summer wanting to get a better idea of the different paths that art offered. I had two jobs so I could test the waters in two different areas of the art world. The first was with Elektra Steel, so that I could see how a maker operates. The second with Catharine Clark Gallery, so that I could explore the gallery-side of artistic careers. Over the course of the summer, a simple two-month investigation of gallery and maker careers morphed into a reflection about my own artwork and how I wanted my future in the arts to take form. 

Alexis working on enamel pins for Elektra Steel.

Alexis working on enamel pins for Elektra Steel.

I began to understand what it took to develop a portfolio of my work in a comprehensive and professional way. That understanding was supplemented by the work I did at the gallery, where I learned about the represented artists, their bodies of work, and how they documented them. I became invested in documenting my own work: I kept a journal of all previous, current, and future projects, photographed my finished works, and created a website and Instagram account to serve as my artistic portfolio. 

Working with Zai gave me the opportunity to see the behind the scenes of all of her Instagram posts, blogs, and design thinking. It helped me to see my art not only as a hobby or a side project, but as a career. Despite this new outlook, putting together the portfolio often felt overwhelming: I had never created a website, and felt like I was posing as a maker when I didn’t have the authority to put my work out online.

Drip I by Alexis Bullock

Drip I by Alexis Bullock

Making a journal to track my works, the professional connections I made this summer, and my website and Instagram activity helped me focus on building a portfolio for my own sake, not for the sake of others to see it. Zai made sure I understood the most important part of building this portfolio: to document my work for the future, not for the present. I wasn’t starting an Instagram to get a certain number of followers or likes, but rather to have an established platform where I could collect and share my work going forward. 

With that in mind, I began creating my website on Squarespace, and set up a professional email and Instagram as well. Although I only have three of my projects on the site right now, it has made me more sure that I want to continue creating and sharing work. I truly believe now that all makers should collect their work online in some form. For me, it has become the foundation of endless inspiration for more projects. 

--

Check out Alexis's work in wood, metal, and thermoplastic over at alexisbullock.com, and follow her on Instagram at @alexisbullockdesigns

The Trickiest Thing I've Welded Lately

Here are some process photos from an experiment I did earlier this summer. It was technically challenging, and I learned a lot. This piece isn't quite ready for prime-time yet, but it was a pretty cool v1 prototype!

For the fabricators and tinkerers out there who are curious about how I made this:

  • Created a sphere with Voronois facets in Grasshopper/Rhino (thanks, Phil!)
  • Stretched out the form and removed facets in SketchUp
  • "Unfolded" the model in the buggy and (I think?) now-defunct 123D Make (probably gonna switch to Pepakura or Fusion)
  • Cleaned up the file in Illustrator and created the vector drawing for lasercutting
  • Had the parts lasercut
  • For two of the bowls, I tried TIG welding the parts together; for one, I MIG welded it. The welding would have been much easier if I'd had a second pair of hands. The parts required a lot of strength to hold them in the right spots (you can't clamp an irregular beast like this!), and TIG welding with filler rod requires two hands. I ended up getting crafty with weights, props, and using my elbows and knees to hold the pieces in the right place in order to weld. It was not pretty!

Things I still need to figure out:

  • The edges and corners are super sharp, so it's unpleasant to touch
  • I'm trying to avoid welding all of the edges
  • I'm not sure I like the look of either tabs or perforations

For now, this piece is on the back burner. But it inspired another set of irregular, faceted vessels, so stay tuned for that!

Redwood City Utility Box Mural

I painted my first mural! Thanks to Redwood City Parks, Recreation, and Community Service, I recently got the opportunity to beautify a set of utility boxes at the corner of Middlefield Rd. and Willow St. in Redwood City, California.

One of my goals for this year was to paint a mural. I'd been wanting to explore my favorite patterns but on a larger scale. I saw that Redwood City Parks, Recreation, and Community Service had put out a call for artists, and I applied. I put together a proposal based on the maze motif I'd developed in a previous steel project. My design was selected, and I dove in!

This project came with a number of challenges, all of which made me a better artist. First, I learned how to work with paint! I hadn't painted anything in years, and this project was a crash course in primer, mixing colors, and using painter's tape. Secondly, working away from a studio -- and away from tools, a sink, and supplies -- meant that I had to plan ahead, and keep a mobile studio in the back of my car. Lastly, it was 90 degrees. Some days, my shirt was drenched with sweat by 8:30am! I have a newfound respect for anyone whose job requires them to be out in the elements all day long. 

The best part of this project was getting to know the community during those six days I spent on that street corner. I had lovely chats with curious folks stopped at the red light. I fielded questions and waves from little kids. I chatted with Mexican workers in broken Spanglish. I got a joyful pep talk from a homeless woman pushing a shopping cart. On an especially hot day, an employee from the grocery store nearby came by and brought me a coconut water. An hour later, a woman in a passing car literally offered me the hat off her head. I got more smiles and thumbs-ups from strangers than I could begin to count. 

I feel like I've gotten to know this corner of Redwood City so well. It's been an honor and a privilege. This sounds cheesy, but it was humbling to see how a little splash of art on a street corner could bring smiles to so many people's faces. This project was my first foray into public art, and I think I might be hooked.

If you're in the area, go check out the boxes in person! Here's a map of where they're located. And if you'd like to check out all of the other public art in Redwood City, check out the Explore RWC app for Apple and Android phones. (Side note: How cool is it that Redwood City not only invests in public art, but even built an app to help people discover it!) 

Here are some process photos:

Thank you to the following folks: 

  • Redwood City Parks, Recreation, and Community Service: Thank you for selecting my design and giving me this amazing opportunity! Sheila Cepero and Beth Mostovoy, thank you for supporting local artists and giving us a platform to share our work.
  • Alexis Bullock: Thanks to my awesome summer intern for being down to help me paint this mural in the blazing heat!
  • Sigona's Farmers Market: Thanks for being my "home base" throughout this project! Your food, parking lot, and bathroom were lifesavers, and I really enjoyed getting to meet Carmelo and a handful of your employees.
  • Johnathon DeSoto: Your tape tutorials were a game-changer, Johnathon! Thanks for sharing your secrets with me.
  • Jeff Goodwin, Emi Grannis, and Nicole Sweeney: Thanks, Maker Fam, for your moral support throughout this project (and always). 
  • Phil Reyneri: I will never forget that you drove all the way down to Redwood City just to help me with that damned shade structure -- I owe you one!

Decking Out a San Francisco Hedge Fund Office

Just wrapped up my biggest job to date: Six custom wall hangings for a San Francisco hedge fund office! These photos are from before the installation, so stay tuned for pics of the pieces in their beautiful new homes. 

Here's Maze, a giant triptych for their main conference room:

And here are the three pieces in the Folds series:

If you're interested in a custom piece for your office or home, email me at zai@elektrasteel.com.

Cube Rose Series

Here's a series I wrapped up in early February of this year. Each piece is 27"x30"x1/2". No client, just for fun. 

More photos here: Cube Rose No. 1Cube Rose No. 2Cube Rose No. 3Cube Rose No. 4. Contact Zai to purchase.

Interview on Tiffany Han's Podcast

I was recently interviewed on Tiffany Han's dynamic and charming podcast, called Raise Your Hand Say Yes. Tiffany and I covered a lot of ground in this deep-dive conversation: What it's like being a woman in a traditionally male-dominated field, the importance of building relationships with mentors, and how to go about finding (or creating!) community when you're running a business on your own. Listen here! 

Here's how Tiffany describes the episode: "I was so excited to talk with designer, metalworker, and entrepreneur Zai Divecha for this week's episode! You'll hear the story of how Zai went from Yale grad (undergrad and grad) to a career in tech to where she is now, specializing in TIG welding and producing gorgeous fine art wall hangings. 

"You'll also hear us talk about the steps Zai took as she was deciding to leave tech and become a full-time artist, and what helped her in her first year of the transition. Finally, you'll get the scoop on what kinds of support networks carry her through and some of the digital ways she keeps her fine art business organized! 

"If you've considered walking away from a looks good on paper career or degree to raise your hand and say yes to something creative, this episode is for you! Oh, and if you're looking for a dose of empowerment, you'll get that too! You guys - welding is so badass!"

Thank you, Tiffany, for a fun and engaging conversation! Check out the episode here, or listen on iTunes

Free Download: Mobile Wallpaper

Give your phone a quick makeover with these mobile wallpapers! Open this website on your phone, then touch and hold to save an image. Go to your phone's settings to swap in the new wallpaper. Enjoy!

elektra-steel-wallpaper-1
elektra-steel-wallpaper-2
elektra-steel-wallpaper-3
elektra-steel-wallpaper-4

Curves Ahead

I recently wrapped up this curvy, custom ribbon, and shipped it off to its new home in New Haven, Connecticut. My clients, Marc and Horacio, were wonderful to work with. Marc was one of my professors at Yale (he runs the Yale Center for Emotional Intelligence) and his husband Horacio is a talented documentary filmmaker. Their request for flowing, organic shapes pushed me out of my comfort zone a bit -- I can't remember the last time I made anything with curves! I love how this piece turned out, and I'm looking forward to exploring curves in future pieces.

Some behind-the-scenes photos from the process of designing and fabricating this piece:

Interested in a custom piece for your home or office? Email me at zai@elektrasteel.com and let's discuss!